|
王柯,现任重庆大学讲师。2008年在西北工业大学获得学士学位,2014年在西北工业大学获得博士学位。主要研究方向:六方晶体结构金属的塑性变形机制;航空结构材料钛合金的锻造和热处理。
姓名 王柯
性别 男
生年 王柯
籍贯 贵州遵义
职称 讲师
学历 博士
学位 工学博士
部门 材料加工工程系
email study_ke@cqu.edu.cn
电话
地址 重庆市沙坪坝区沙正街174号材料学院
邮编 400045
学习工作经历
2004.09 - 2008.06 西北工业大学 材料科学与工程学院 工学学士
2008.09 - 2014.06 西北工业大学 材料科学与工程学院 工学博士(硕博连读)
2014.07 - 至今 重庆大学 材料科学与工程学院 材料加工系 讲师
科研项目
预变形对钛合金两相区冷却过程中次生α相形核的影响;国家自然科学基金青年基金;2016.1~2018.12;负责人
论文及专著
期刊论文
M. Wu, R. Xin, Y. Wang, Y. Zhou, K. Wang*, Q. Liu, Microstructure, texture and mechanical properties of commercial high-purity thick titanium plates jointed by electron beam welding, Materials Science and Engineering: A, 677(2016) 50-57.
K. Wang*, M. Li, Q. Liu, Evolution mechanisms of the primary α and β phases during α/β deformation of an α/β titanium alloy TC8, Materials Characterization, 120 (2016) 115-123
K. Wang*, D.L. Sun, Y.L. Wu, R.L. Xin, M.Y. Wu, Q. Liu,Correlation between flow behavior and microstructure evolution during α/β deformation of TA19 titanium alloy, Advanced Engineering Materials,
K. Wang*, M.Q. Li, Characterization of discontinuous yielding phenomenon in isothermal compression of TC8 titanium alloy, Trans. Nonferrous Met. Soc. China, 26(2016) 1583-1588.
K. Wang, M.Q. Li. Morphology and crystallographic orientation of the secondary α phase in a compressed α/β titanium alloy.Scripta Materialia, 68 (2013) 964-967
K. Wang, M.Q. Li. Effect of hot deformation and heat treatment on secondary α phase evolution of TC8 titanium alloy. Materials Science and Engineering A, 613 (2014) 209-216
K. Wang, M.Q. Li. Flow behavior and deformation mechanism in the isothermal compression of the TC8 titanium alloy. Materials Science and Engineering A, 600 (2014) 122-128.
K. Wang, M.Q. Li, J. Luo, C. Li. Effect of the δ phase on the deformation behavior in isothermal compression of superalloy GH4169. Materials Science and Engineering A, 528 (2011) 4723-4731.
K. Wang, M.Q. Li, C. Li. The δ and austenite phase evolution and model in the solution treatment of superalloy GH4169. Materials Science and Technology, 29 (2013) 346-350
李晨, 李淼泉, 王柯. 固溶处理GH4169合金的高温变形行为. 航空学报, 31 (2010) 368-376
H.M. Li, M.Q. Li, J. Luo, K. Wang, Microstructure and mechanical properties of heat-treated Ti–5Al–2Sn–2Zr–4Mo–4Cr, Trans. Nonferrous Met. Soc. China, 25(2015) 2893-2900.
W.J. He, C. Li, B.F. Luan, R.S. Qiu, K. Wang, Z.Q. Li, Q. Liu, Deformation behaviors and processing maps of CNTs/Al alloy composite fabricated by flake powder metallurgy, Trans. Nonferrous Met. Soc. China, 25(2015) 3578-3584.
会议论文
K. Wang, M.Q. Li. Secondary a Phase Evolution in the Isothermal Compression and Heat Treatment of TC8 Titanium Alloy. PRICM: 8 Pacific Rim International Congress on Advanced Materials and Processing. Published Online: 6 SEP 2013. DOI: 10.1002/9781118792148.ch325
K. Wang*, B.F. Luan, M.Q. Li, Q. Liu, Phase dependent restoration mechanisms of TC8 titanium alloy during hot compression in the two phase region, IOP Conf. Series: Materials Science and Engineering, 89 (2015) 012047
科研团队
“形变金属及微结构”科研团队成员,团队主页:http://www.qingliu.cqu.edu.cn/
|
声明:本网部分文章和图片来源于网络,发布的文章仅用于材料专业知识和市场资讯的交流与分享,不用于任何商业目的。任何个人或组织若对文章版权或其内容的真实性、准确性存有疑义,请第一时间联系我们,我们将及时进行处理。
|