|
姓名 曹宇
性别 男
生年 1986年8月
籍贯
职称 讲师
学历 工学博士
学位
部门 材料加工工程系
email yucao928@cqu.edu.cn
电话 18723145998
地址 重庆市沙坪坝区沙正街174号材料学院
邮编 400045
学习工作经历
2005-2009年 东北大学 材料成型及控制工程 工学学士
2009-2011年 东北大学 轧制技术与连轧自动化国家重点实验室 工学硕士
2011-2016年 东北大学 轧制技术与连轧自动化国家重点实验室 工学博士
2014-2015年 加拿大麦吉尔大学 材料工程系 联合培养博士 导师:John J. Jonas
社会兼职
1. 中国金属学会轧钢分会塑性加工理论与新技术学术委员会委员
2. "Materials & Design"、"Journal of Nuclear Materials"、"Steel Research International"、"Journal of Materials Engineering and Performance"、"Acta Metallurgica Sinica (English Letters)"、"High Temperature Materials and Processes"等SCI期刊审稿人
论文及专著
1.期刊论文
Yu Cao, Hongshuang Di, Guangjie Huang, On the grain boundary character distribution of Incoloy 800H during dynamic recrystallization, Journal of Nuclear Materials, 2017, 486, 21-25.
Yu Cao, Xinjun Shen, Hongshuang Di, Guangjie Huang, Texture and microstructure evolution of Incoloy 800H superalloy during hot rolling and solution treatment, Journal of Alloys and Compounds, 2017, 698, 304-316.
Yu Cao, Hongshuang Di, Grain boundary character distribution during the post-deformation recrystallization of Incoloy 800H at elevated temperature, Materials Letters, 2016, 163, 24-27.
Yu Cao, Hongshuang Di, Research on the hot deformation behavior of a Fe-Ni-Cr alloy (800H) at temperatures above 1000℃, Journal of Nuclear Materials, 2015, 465, 104-115.
Yu Cao, Hongshuang Di, Jiecen Zhang, Yaohua Yang, Dynamic behavior and microstructural evolution during moderate to high strain rate hot deformation of a Fe-Ni-Cr alloy (Incoloy 800H), Journal of Nuclear Materials, 2015, 456, 133-141.
Yu Cao, Hongshuang Di, R.D.K. Misra, The impact of aging pre-treatment on the hot deformation behavior of Incoloy 800H at 750℃, Journal of Nuclear Materials, 2014, 452, 77-86.
Yu Cao, Hongshuang Di, R.D.K. Misra, Xiao Yi, Jiecen Zhang, Tianjun Ma, On the hot deformation behavior of AISI 420 stainless steel based on constitutive analysis and CSL model, Material Science and Engineering A, 2014, 593: 111-119.
Yu Cao, Hongshuang Di, Jingqi Zhang, Jiecen Zhang, Tianjun Ma, R.D.K. Misra, An electron backscattered diffraction study on the dynamic recrystallization behavior of a nickel-chromium alloy (800H) during hot deformation, Materials Science and Engineering A, 2013, 585: 71-85.
Yu Cao, Hongshuang Di, R.D.K. Misra, Jiecen Zhang,Hot deformation behavior of Incoloy 800H at intermediate temperatures: constitutive models and microstructure analysis, Journal of Materials Engineering and Performance, 2014, 23, 4298-4308.
Yu Cao, Hongshuang Di, R.D.K. Misra, Dynamic recrystallization behavior of AISI 420 stainless steel under hot compression, High Temperature Materials and Processes, 2015, 34, 155-161.
曹宇,邸洪双,张敬奇,马天军,张洁岑,800H合金热变形行为及热加工性能研究,金属学报,2013, 49(7): 811-821.
曹宇,邸洪双, 张洁岑, 张敬奇, 马天军,800H合金动态再结晶行为研究,金属学报,2012, 48(10): 1175-1185.
曹宇,邸洪双,张敬奇,马天军,800H合金静态软化行为及其亚结构演变,材料科学与工艺,2013, 21(3): 95-104.
曹宇,邸洪双,马天军,张敬奇,800H合金热变形行为研究,东北大学学报(自然科学版),2012, 33(2): 213-217.
Jiecen Zhang, Yu Cao, Guangwei Jiang, Hongshuang Di, Effect of annealing temperature on the precipitation behavior and texture evolution in a warm-rolled P-containing interstitial-Free high strength steel, Acta Metallurgica Sinica (English Letters), 2014, 27, 395-400.
Jingqi Zhang, Hongshuang Di, Xiaoyu Wang, Yu Cao, Jiecen Zhang, Tianjun Ma,Constitutive analysis of the hot deformation behavior of Fe-23Mn-2Al-0.2C twinning induced plasticity steel in consideration of strain, Materials and Design, 2013, 44: 354-364.
J. Zhao, W. Hu, X. Wang, J. Kang, Y. Cao, G. Yuan, H. Di, R.D.K. Misra, A novel thermo-mechanical controlled processing for large-thickness microalloyed 560 MPa (X80) pipeline strip under ultra-fast cooling, Materials Science and Engineering A, 2016, 673: 373-377.
Jingqi Zhang, Hongshuang Di, Hongtao Wang, Kun Mao, Tianjun Ma, Yu Cao, Hot deformation behavior of Ti-15-3 titanium alloy: a study using processing maps, activation energy map, and Zener-Hollomon parameter map, Journal of Materials Science, 2012, 47: 4000-4011.
张洁岑,邸洪双,蒋光炜,曹宇,退火温度对含磷高强IF钢FeTiP析出行为的影响,东北大学学报(自然科学版),2014, 35(10): 1404-1407.
蒋光炜,王春柳,曹宇,邸洪双,连续退火工艺对B250P钢组织性能的影响,东北大学学报(自然科学版),2014, 35(10): 1408-1411.
2. 会议论文
曹宇,邸洪双,易啸,杨耀华,张洁岑,2Cr13马氏体耐热钢时效处理中碳化物析出行为,第十三届塑性加工学术年会论文集,2013: 53-56.
Hongshuang Di, Yu Cao, Jiecen Zhang, Yaohua Yang, Dynamic behavior and constitutive modeling of AISI 420 stainless steel at elevated temperature, The 11th Asia-Pacific Conference on Materials Processing, Auckland New Zealand, July 6-9, 2014.
Guangwei Jiang, Jiecen Zhang, Yu Cao, Hongshuang Di, The precipitation behavior of ferritic-rolled and batch-annealed high strength interstitial free steel, The 11th Asia-Pacific Conference on Materials Processing, Auckland New Zealand, July 6-9, 2014.
Guangwei Jiang, Hongshuang Di, Yu Cao, Zhongwei Zhang, Yafei Wang, Pengfei Sui, Flow stress prediction for B210P steel at hot working conditions, The 11th international conference on numerical methods in industrial forming processes: NUMIFORM 2013: 630-636.
蒋光炜,邸洪双,曹宇,王春柳,王亚飞,B250P钢冷轧变形抗力模型,第十三届塑性加工学术年会论文集,2013: 381-384.
张洁岑,邸洪双,蒋光炜,曹宇,杨耀华,王晓瑜,高强IF钢铁素体区热轧退火板的织构演变,第十三届塑性加工学术年会论文集,2013: 389-392.
张中炜,邸洪双,曹宇,蒋光炜,铁素体区开轧温度对含磷高强IF钢组织性能影响,第十三届塑性加工学术年会论文集,2013: 385-388.
表彰及奖励
2012年 教育部博士研究生学术新人奖
2012-2014年 博士研究生国家奖学金
2013年 沈阳市优秀研究生
2015年 沈阳市自然科学学术成果三等
科研团队
“形变金属及微结构”科研团队成员,团队主页:http://www.qingliu.cqu.edu.cn/
|
声明:本网部分文章和图片来源于网络,发布的文章仅用于材料专业知识和市场资讯的交流与分享,不用于任何商业目的。任何个人或组织若对文章版权或其内容的真实性、准确性存有疑义,请第一时间联系我们,我们将及时进行处理。
|