中南大学材料学院李云平

taohua89 · 发表于 2017-3-30 11:56:49

李云平，中南大学材料科学与工程学院教授，日本东京大学材料工学博士。研究领域：
1) 无镍生物钴合金的基础研究及开发
结合相图计算与材料加工技术，成功开发出医用无镍钴合金。该合金主要用作高级外科手术用具、牙床材料、人工关节等，已于2012年取得日本生产注册商标COBARION®并获得产业化，现在年销售量达到约RMB4000万。与传统不锈钢相比，开发出的钴合金具有更好的生物相容性、更高的刃口硬度(HV500以上，用于微创外科手术用具），更高的耐磨性（不锈钢的8倍，用于人工关节）。在有限元计算与材料加工图技术的基础上，开发出可成功预测复杂钴合金制品微观组织的智能锻造技术，目前该成果已获得日本最大钢铁企业JFE采纳，并成功应用于汽车用高强钢板的加工制作。
2) 固液界面反应控制及相关新型合金开发
首次提出在钴合金表面制备出致密纳米氧化膜来提高耐铝液腐蚀的性能，该成果已在日本最大精密铝铸造公司SMC获得产业化应用。在相图计算结果的基础上，合理调配合金成分，同时提高镍基合金的强度与抗腐蚀性能。该成果作为含氟有机物注射机的螺杆获得应用。
3) 新型钴镍基超合金强化机理表征及开发
首次利用铃木效应与第二相强化的复合增强的原理，开发出世界上强度最高的Co-Ni-Cr基超合金：在700℃时，该材料的屈服强度超过1300MPa，比现有钴基超合金(HASTELLOY)高出约250MPa，比现最强镍基超合金(INCONEL718)高出约300MPa。该材料将应用于高温部件及航空发动机的关键部件。
4) 金属电子束熔炼(EBM)3D打印技术开发
在日本首次进行电子束熔炼金属粉末3D打印技术的研究，成功开发出各种具有复杂形状的钴，镍，铁，钛基合金制品；制品涉及医用，汽车，航空，以及固体燃料电池等领域。
5) 新型粉末冶金技术
首次发现对铜合金电导率无害的烧结助剂。在此基础上，制备出耐磨高导电W-Cu电极材料，开发材具有更高的硬度和导电率；首次开发出高效分段球磨技术并以此开发出高强高导电Cu-Ti-C合金，开发合金的电导率85%IACS以上，强度650MPa以上，可用于各种耐磨导电电子部件。
主页：http://faculty.csu.edu.cn/liyunping1/zh_CN/index.htm
中南大学材料科学与工程学院
邮箱 lyping@csu.edu.cn
教育背景
2004年4月～2007年3月日本　东京大学　材料工学博士
1997年9月～2000年2月中国　中南大学　材料学硕士
1993年9月～1997年6月　中国　中南大学粉末冶金研究院　工学学士
职业背景
2015年 11月～至今日本东北大学金属材料研究所客座教授
2014年12月～至今中南大学材料科学与工程学院教授
2009年4月～2014年11月日本东北大学金属材料研究所助理教授
2007年11月～2009年3月日本东北大学金属材料研究所博士后研究员
2007年4月～2007年10月日本东京大学大学院工学系研究科外国人特别研究员
2003年10月～2007年3月日本东京大学大学院工学系研究科博士研究生

讲授课程
1）金属3D打印的现状及存在问题
2）材料结构分析-X射线衍射分析

科研方向
项目
中南大学升华学者 2014/12-2019/11
粉末冶金国家重点实验室自主课题 50万 2015-2016
湖南省杰出青年基金 20万 2016-2017

学术成果
最近动态：
描述镁合金合金元素对退孪晶影响的长篇论文15000字，被材料学国际一级期刊International Journal of Plasticity(影响因子5.623)接收.
Yujie Cui, Yunping Li*, Zhongchang Wang, Xiao Ding, Yuichiro Koizumi, Huakang Bian, Liyang Lin, Akihiko Chiba, Impact of solute elements on detwinning in magnesium and its alloys, International Journal of Plasticity, 2016
著作
1）Yunping Li, Akihiko Chiba, Application of Smart Hot Forging Technique in Producing Biomedical Co–Cr–Mo Artificial Implants, 第三章，Springer Series in Advances in Metallic Biomaterials, 2015, pp 57-83
http://link.springer.com/content/pdf/10.1007%2F978-3-662-46836-4.pdf
2) 地域创新研究成果集（日）,国家创新战略支援项目研究公开著作, LIAISON出版社, 2013年, 14篇/39篇, 无排名
3) 都市领域产学研成果集（日），国家大型项目研究公开著作，LIAISON 出版社，2011年，18页/200页，无排名
4) 都市领域产学研促进事业成果集（日），国家大型项目研究公开著作，LIAISON出版社，2010年，8篇/31篇，无排名
5) 金属注射成形原理与应用，中南大学出版社，2004年，100页/277页，排名第2
论文
2017
1) Jiaxiang Li, Yunping Li*, Zhongchang Wang, Huakang Bian, Yuhang Hou, Fenglin Wang, Guofu Xu, Bin Liu, Yong Liu, Ultrahigh Oxidation Resistance and High Electrical Conductivity in Copper-Silver Powder, Scientific Report, 2016, in press. (IF=5.226)
2) Yujie Cui, Yunping Li*, Zhongchang Wang, Xiao Ding, Yuichiro Koizumi, Huakang Bian, Liyang Lin, Akihiko Chiba, Impact of solute elements on detwinning in magnesium and its alloys, Inter J Plast, 2016, In press, (IF=5.623).
3) Xiao Li, Shu Yu, Yunping Li, Qiang Wu, Zhuan Li, Tao Xiao, Lihong Liu, Xiaoning Guo, Effect of pre-fatigue on bending behavior of biomedical 2.5D C/C composites, Mater Sci Eng A, 682(2016), 290-295. (IF=2.65)
2016
4) Taiyo Takashima, Yuichiro Koizumi, Yunping Li, Kenta Yamanaka, Tsuyoshi Saito, Akihiko Chiba，Effect of Building Position on Phase Distribution in Co-Cr-Mo Alloy Additive Manufactured by Electron-Beam Melting, Mater Trans, 12(2016), 2041-2047. (IF=0.689)
http://doi.org/10.2320/matertrans.Y-M2016826
5) Huakang Bian, Yunping Li*, Kenta Yamanaka, Daixiu Wei, Yujie Cui, Fenglin Wang, Shihai Sun, Yuichiro Koizumi, Akihiko Chiba, Precipitation behavior of a novel cobalt-based superalloy subjected to prior plastic deformations, Mater Design, 112(2016) 1-10. (IF=3.997)
http://dx.doi.org/10.1016/j.matdes.2016.09.004
6) Yunping Li*, Yuichiro Koizumi, Akihiko Chiba, Dynamic recrystallization behavior of biomedical Co-29Cr-6Mo-0.16N alloy with extremely low SFE, Mater Sci Eng A, 668(2016) 48-54. (IF=2.65)
http://dx.doi.org/10.1016/j.msea.2016.05.045
7) Fenglin Wang, Yunping Li*, Guoqiang Xie, Kimio Wakoh, Kenta Yamanaka, Yuichiro Koizumi, Akihiko Chiba, “Investigation on hot deformation behavior of nanoscale TiC strengthened Cu alloys fabricated by mechanical milling”, Mater Sci Eng A, 668(2016) 1-12. (IF=2.65)
http://dx.doi.org/10.1016/j.msea.2016.05.042
8) Yunping Li*, Jiaxiang Li, Yuichiro Koizumi, Akihiko Chiba, Dynamic recrystallization behavior of biomedical Co-29Cr-6Mo-0.16N alloy, Mater Charact, 118(2016) 50-56. (IF=2.38)
http://dx.doi.org/10.1016/j.matchar.2016.05.004
9) Xiaoyu Wang, Yunping Li*, Yuhang Hou, Yuichiro Koizumi, Akihiko Chiba, Effects of surface friction treatment on the in vitro release of constituent metals from the biomedical Co-29Cr-6Mo-0.16N alloy, Mater Sci Eng C, 64(2016), 260-268. (IF=3.42)
http://dx.doi.org/10.1016/j.msec.2016.03.050
10) Daixiu Wei, Yuichiro Koizumi, Yunping Li, Kenta Yamanaka, Akihiko Chiba, Submicron lamellar porous structure formed by selective dissolution of Ti-Al alloy, Mater Design, 98(2016), 1-11. (IF=3.997)
http://dx.doi.org/10.1016/j.matdes.2016.02.096
11) 髙島大洋，小泉雄一郎，李云平，山中謙太，齋藤毅, 千葉晶彦，電子ビーム溶融（EBM）積層造形により作製されたCo-Cr-Mo 合金の造形位置が及ぼす組織への影響, 粉体および粉末冶金, 2016, 63(1), 10-16.
12) Yuichiro Koizumi, Yan Chen, Yunping Li, Kenta Yamanaka, Akihiko Chiba, Shunichiro Tanaka, Yoshihiro Hagiwara“ Uneven damage on head and liner contact surfaces of a retrieved Co-Cr-based metal-on-metal hip joint bearing: An important reason for the high failure rate”, Mater Sci Eng C, 62(2016), 532-543. (IF=3.42)
http://dx.doi.org/ 10.1016/j.msec.2016.01.006
13) Fenglin Wang, Yunping Li, Xiaoyu Wang, Yuichiro Koizumi, Kenta Yamanaka, Akihiko Chiba, “In-situ Fabrication and Characterization of Ultrafine Structured Cu-TiC Composites with High Strength and High Conductivity by Mechanical Milling”, J Alloy Compd, 657(2016) 122-132 (IF=3.01)
http://dx.doi.org/10.1016/j.jallcom.2015.10.061
2015
14) Huakang Bian, Xiandong Xu, Yunping Li*, Yuichiro Koizumi, Zhongchang Wang, Mingwei Chen, Kenta Yamanaka, Akihiko Chiba, “Regulating the γ’ growth in superalloys”, NPG Asia Materials, 7(2015);e212. (Nature子刊; IF=10.18)
http://dx.doi.org/10.1038/am?.2015.96
15) Fenglin Wang, Yunping Li*, Xiandong Xu, Yuichiro Koizumi, Kenta Yamanaka, Huakang Bian, Akihiko Chiba, “Superthermostability of Nanoscale TiC-reinforced Copper Alloys Manufactured by a Two-step Ball-milling Process”, Philos Mag, 2015, (95) 4035-4053 (IF=1.632)
http://dx.doi.org/10.1080/14786435.2015.1112442
16) Yuhang Hou, Yunping Li*, Chen Zhang, Akihiko Chiba,"Influence of Mo addition on Corrosion Resistance of Co-modified Ni-Cr-Mo alloys after cold working", Corros Sci, 99(2015) 185-193. (IF=5.15)
http://dx.doi.org/10.1016/j.corsci.2015.07.004
17) Phacharaphon Tunthawiroon, Yunping Li*, Akihiko Chiba, “Influences of alloyed Si on the corrosion resistance of Co–Cr–Mo alloy to molten Al by iso-thermal oxidation in air”, Corros Sci, 100(2015) 428-434.(权威期刊IF=5.15)
http://dx.doi.org/10.1016/j.corsci.2015.08.014
18) Yan Chen, Yunping Li*, Shingo Kurosu, Ning Tang, Yuichiro Koizumi, Akihiko Chiba, “Analysis of In-vitro Wear Behavior and Contact Mechanisms of Metal-on-Metal Hip Joint Bearings with Different Radial Clearances”, Mater Trans, 56(2015), 826-834. (重要期刊IF=0.689)
http://dx.doi.org/10.2320/matertrans.M2014440
19) Yunping Li*, Xiandong Xu, Chen Zhang, Yuhang Hou, Akihiko Chiba, " Regulating the Passive Film of NiCoCrMo Alloy in Hydrofluoric Acid Solution by Small Addition of Cu", Corros Sci, 98(2015) 119-127. (权威期刊IF=5.15)
http://doi:10.1016/j.corsci.2015.05.024
20) Daixiu Wei, Yuichiro Koizumi, Akinori Yamanaka, Masahiko Yoshino, Hiroaki Nishiyama, Yunping Li, Akihiko Chiba, Control of γ lamellae precipitation in Ti-39 at.% Al single crystals by nanogrooving process, Acta Mater, 96(2015), 352-365. (权威期刊IF=5.06)
http://doi: 10.1016/j.actamat.2015.05.016
21) Yuankuai Cao, Fanpei Zeng, Jingzhong Lu, Bin Liu, Yong Liu, Yunping Li, In Situ Synthesis of TiB/Ti6Al4V composites reinforced with Nano TiB through SPS, Mater Trans, 56(2015) 259-263. (重要期刊IF=0.689)
http://doi:10.2320/matertrans.M2014347
22) Phacharaphon Tunthawiroon, Yunping Li*, Ning Tang, Akihiko Chiba, “Effects of Si Addition on Corrosion Behavior of Co-29Cr-6Mo alloy for SOFC Operation at Intermediate Temperatures”, Corros Sci, 95(2015), 88-99. (权威期刊IF=5.15)
http://dx.doi.org/10.1016/j.corsci.2015.02.036
23) Yujie Cui, Yunping Li*, Shihai Sun, Huakang Bian, Hua Huang, Zhongchang Wang, Yuichiro Koizumi, Akihiko Chiba, “Enhanced Damping Capacity of Magnesium Alloys by Tensile Twin Boundary”, Scripta Mater, 108(2015) 8-11. (权威期刊IF=3.31)
http://dx.doi.org/10.1016/j.scriptamat.2015.01.002
24) Daixiu Wei, Yuichiro Koizumi, Huakang Bian, Yunping Li, Akihiko Chiba, “Nano-lamellar/nano-tubular hierarchical porous structure produced by selective dissolution and anodization of lamellar Ti-40 at.% Al alloy”, Mater Letter, 145(2015), 15-18. (重要期刊IF=2.44)
http://dx.doi.org/10.1016/j.matlet.2014.11.059
25) Shihai Sun, Yuichiro Koizumi, Shingo Kurosu, Hiroaki Matsumoto, Yunping Li, Akihiko Chiba, “Phase and grain size inhomogeneity and their influences on creep behavior of Co-Cr-Mo alloy additive manufactured by electron-beam melting (EBM)” Acta Mater, 86(2015) 305-318. (权威期刊IF=5.06)
http://dx.doi.org/10.1016/ j.actamat.2014.11.012
26) Yuhang Hou, Yunping Li*, Chen Zhang, Akihiko Chiba, "Ex-situ Observation on the Dissolution Behavior of Ni-16Cr-15Mo and Ni-30Co-16Cr-15Mo Alloys in Aqueous Hydrofluoric Acid Solution", Corros Sci, 90(2015), 133-139. (权威期刊IF=5.15)
http://dx.doi.org/10.1016/j.corsci.2014.10.003
2014
27) Takuya Mitsunobu, Yuichiro Koizumi, Byoung-Soo Lee, Kenta Yamanaka, Hiroaki Matsumoto, Yunping Li, Akihiko Chiba, "Role of strain-induced martensitic transformation in the formation of extrusion and intrusion during fatigue deformation of biomedical Co-Cr-Mo-N alloys", Acta Mater, 81(2014) 377-385. (权威期刊IF=5.06)
http://dx.doi.org/10.1016/j.actamat.2014.08.039
28) Yuhang Hou, Yunping Li*, Chen Zhang, Yuichiro Koizumi, Akihiko Chiba,"Influence of Cold Working on Corrosion resistance of NiCrMo and NiCoCrMo Alloys", Corros Sci, 89(2014), 258-267. (权威期刊IF=5.15)
http://dx.doi.org/10.1016/j.corsci.2014.09.004
29) Fenglin Wang, Yunping Li*, Kimo Wakon, Akihiko Chiba, “Influence of two-step-ball-milling condition on electrical and mechanical properties of TiC nanoparticle-strengthened Cu alloys”, Mater Design, 64(2014)441-449. (权威期刊 IF=3.997)
http://dx.doi.org/10.1016/j.matdes.2014.08.027
30) Chen Zhang, Yunping Li*, Yuhang Hou, Yuichiro Koizumi, Akihiko Chiba,"Influence of Fe and Cu Addition on Corrosion resistance of NiCrMo and NiCoCrMo Alloys", Corros Sci, 89(2014), 81-92. (权威期刊IF=5.15)
http://dx.doi.org/10.1016/j.corsci.2014.08.010
31) Yan Chen, Yunping Li*, Shingo Kurosu, Kenta Yamanaka, Ning Tang, Akihiko Chiba, “Effects of microstructures on the sliding behavior of hot-pressed CoCrMo alloys", Wear, 319 (2014), 200-210. (权威期刊IF=2.32)
http://dx.doi.org/10.1016/j.wear.2014.07.022
32) Ning Tang, Yunping Li*, Phacharaphon Tunthawiroon, Yuichiro Koizumi, Akihiko Chiba,“Thermo-mechanical fatigue test of a wrought Co-based alloy as potential tooling material for die casting”, Mater Sci Eng A, 615(2014) 164-168. (IF=2.65)
http://dx.doi.org/10.1016/j.msea.2014.07.073
33) Hiroaki Matsumoto, Masami Kitamura, Yunping Li, Yuichiro Koizumi, Akihiko Chiba, “Hot forging characteristic of Ti-5Al-5V-5Mo-3Cr alloy with single metastable b microstructure” Mater Sci Eng A, 611 (2014) 337-344. (IF=2.65)
http://dx.doi.org/10.1016/j.msea.2014.06.006
34) Shihai Sun, Yuichiro Koizumi, Shingo Kurosu, Yunping Li, Akihiko Chiba, “Effect of phase transformation on tensile behavior of Co–Cr–Mo fabricated by electron–beam melting”, Journal of the Japanese Society of powder and Powder Metallurgy, 61(2014) 234-242.
http://dx.doi.org/10.2497/jjspm.61.234
35) Fenglin Wang, Yunping Li*, Yuichiro Koizumi, Akihiko Chiba, “Cu-Ti-C Alloy with High Strength and High Electrical Conductivity Prepared by Multiple Ball-milling Processes”, Mater Design, 61(2014) 70-74. (IF=3.997)
http://dx.doi.org/10.1016/j.matdes.2014.04.034
36) Yunping Li, Yujie Cui, Huakang Bian, Fenling Wang, Ning Tang, Yan Chen, Bin Liu, Yuichiro Koizumi, Akihiko Chiba, "Twining Activity in Mg Alloy Enriched with a Large Number of Twinning Boundaries", STAM, 15(2014) 035003. (权威期刊IF=3.433)
http://dx.doi.org/10.1088/1468-6996/15/3/035003
37) Yunping Li, Phacharaphon Tunthawiroon, Ning Tang, Yuichiro Koizumi, Akihiko Chiba,“Effects of Al, Ti and Zr doping on Oxide Film of Co-29Cr-6Mo Alloy Used as Al Die-casting Molds” Corros Sci, 84(2014), 147-158. (权威期刊IF=5.15)
http://dx.doi.org/10.1016/j.corsci.2014.03.020
38) Yunping Li, Peng Li, Huakang Bian, Ning Tang, Yuichiro Koizumi, Akihiko Chiba, "Hot Forging Behaviour and its Effects on Oxidation Behavior of W-Cr alloy", Corros Sci, 83(2014), 367–374. (权威期刊IF=5.15)
http://dx.doi.org/10.1016/j.corsci.2014.03.005
39) Ning Tang, Yunping Li*, Yuichiro Koizumi, Shingo Kurosu, Akihiko Chiba, "Effect of Nitridation Treatment on Corrosion behavior of Co–Cr–Mo alloy in liquid Al", Corros Sci, 78(2014), 244-250. (权威期刊IF=5.15)
http://dx.doi.org/10.1016/j.corsci.2013.10.01
40) Xiaoqing Zhang, Yunping Li*, Ning Tang, Emi Onodera, Akihiko Chiba, “Corrosion behavior of CoCrMo alloys in 2 wt% sulfuric acid solution”, Electrochi?mica Acta, 125(2014), 543-555. (权威期刊IF=4.803)
http://dx.doi.org/10.1016/j.electacta.2014.01.143
41) Yunping Li, Xiuru Fan, Ning Tang, Yuichiro Koizumi, Akihiko Chiba,"Effects of Partially Substituting Cobalt for Nickel on the Corrosion Resistance of a Ni-Cr-Mo Alloy to Aqueous Hydrofluoric Acid", Corros Sci, 78(2014), 101-110. (权威期刊IF=5.15)
http://dx.doi.org/10.1016/j.corsci.2013.09.004
42) Shihai Sun, Yuichiro Koizumi, Shingo Kurosu, Yunping Li, Hiroaki Matsumoto, Akihiko Chiba, “Build-direction dependence of microstructure and high-temperature tensile property of Co-Cr-Mo alloy fabricated by electron-beam melting (EBM)” Acta Mater, 64(2014), 154-168. (权威期刊IF=5.06)
http://dx.doi.org/10.1016/j.corsci.2013.10.0042
43) Hiroaki Matsumoto, Yuichiro Koizumi, Tetsuya Ohashi, Byong-Soo Lee, Yunping Li, Akihiko Chiba, “Microscopic mechanism of plastic deformation in a polycrystalline Co-Cr-Mo alloy with a single hcp phase” Acta Mater, 64(2014), 1-11. (权威期刊IF=5.06)
http://dx.doi.org/10.1016/j.actamat.2013.11.005
44) Yunping Li, Teppei Suzuki, Ning Tang, Yuichiro Koizumi, Akihiko Chiba, "Microstructure Evolution of SUS303 Free-cutting Steel during Hot Compression Process", Mater Sci Eng A, 583(2014), 161–168. (IF=2.65)
http://dx.doi.org/10.1016/j.msea.2013.06.069
45) Ning Tang, Yunping Li*, Yuichiro Koizumi, Shingo Kurosu, Akihiko Chiba, "Surface nitriding of a Co–Cr–Mo alloy in nitrogen", Mater Chem Phys, 145(2014), 350-356. (IF=2.10)
http://dx.doi.org/10.1016/j.matchemphys.2014.02.023
46) Yan Chen, Yunping Li*, Shingo Kurosu, Ning Tang, Yuichiro Koizumi, Akihiko Chiba, “Effects of phase constitution and carbide morphology on wear behavior of high-carbon biomedical CoCrMo alloys under lubricated conditions", Wear, 310(2014), 51-62. (权威期刊IF=2.32)
http://dx.doi.org/10.1016/j.wear.2013.12.010
2013年
47) Yuren Wen, Yunping Li, Akihiko Hirata, Yi Zhang, Takesi Fujita, Tadashi Furuhara, C. T. Liu, Akihiko Chiba, Mingwei Chen, “Synergistic alloying effect on microstructural evolution and mechanical properties of Cu precipitation strengthened ferritic alloys” Acta Mater, 61(2013), 7726-7740. (权威期刊IF=5.06)
http://dx.doi.org/10.1016/j.actamat.2013.09.011
48) Yunping Li, Shuo Wu, Huakang Bian, Ning Tang, Bin Liu, Yuichiro Koizumi, Akihiko Chiba, "Grain Refinement due to Complex Twin Formations in Rapid Hot Forging of Magnesium Alloy", Scripta Mater, 68(2013), 171–174. (权威期刊IF=3.31)
http://dx.doi.org/10.1016/j.scriptamat.2012.10.007
49) Phacharaphon Tunthawiroon, Yunping Li*, Ning Tang, Akihiko Chiba, “Enhancement of Corrosion Resistance of Fe-Cr-Mo alloy to Molten Al by Thermal Oxidation in Air” Corros Sci, 77(2013), 97-102. (权威期刊IF=5.15)
http://dx.doi.org/10.1016/j.corsci.2013.07.031
50) Ning Tang, Yunping Li*, Yuichiro Koizumi, Shingo Kurosu, Akihiko Chiba, "Interfacial reaction between Co-Cr-Mo alloy and liquid Al", Corros Sci, 75(2013), 262–268. (权威期刊IF=5.15)
http://dx.doi.org/10.1016/j.corsci.2013.06.009
51) Yunping Li, Ning Tang, Phacharaphon Tunthawiroonb, Yuichiro Koizumi, Akihiko Chiba, "Characterisation of Oxide films Formed on Co-29Cr-6Mo Alloy Used in Die-casting Moulds for Aluminum", Corros Sci, 73(2013), 72–79. (权威期刊IF=5.15)
http://dx.doi.org/10.1016/j.corsci.2013.03.026
52) Ning Tang, Yunping Li*, Yuichiro Koizumi, Shingo Kurosu, Akihiko Chiba, "Experimental and theoretical study on interfacial reaction of solid Co with liquid Al", Corros Sci, 73(2013), 54–61. (权威期刊IF=5.15)
http://dx.doi.org/10.1016/j.corsci.2013.03.024.
53) Yuichiro Koizumi, Sho Suzuki, Kenta Yamanaka, Byoung-Soo Lee, Kazuhisa Sato, Yunping Li, Shingo Kurosu, Hiroaki Matsumoto, Akihiko Chiba, “Strain induced martensitic transformation near twin boundaries in biomedical Co–Cr–Mo alloy with negative stacking fault energy”, Acta Mater, 61(2013), 1648–1661. (权威期刊IF=5.06)
http://dx.doi.org/10.1016/j.actamat.2012.11.041
54) Hua Huang, Chunlin Chen, Zhongchang Wang, Yunping Li, Guangyin Yuan, “Effect of pretreatment and annealing on microstructure and mechanical properties of Mg-1.5Zn-0.25Gd (at. %) alloy reinforced with quasicrystal”, Mater Sci Eng A, 581(2013), 73–82. (重要期刊IF=2.65)
http://dx.doi.org/10.1016/j.msea.2013.06.003
55) Teppei Suzuki, Yunping Li*, Yuichiro Koizumi, Akihiko Chiba, "Quantitative Evaluation in Hot Workability of SUS303 Free-cutting Steel", Mater Sci Eng A, 563A(2013), 117–124. (重要期刊IF=2.65)
http://dx.doi.org/10.1016/j.msea.2012.11.041
56) Hiroaki Matsumoto, Liu Bin, Sang-Hak Lee, Yunping Li, Yoshiki Ono, Akihiko Chiba, "Frequent Occurrence of Discontinuous Dynamic Recrystallization in Ti-6Al-4V Alloy with α′ Martensite Starting Microstructure", Metall. Mater. Trans. A, 44(2013), 3245-3260. (重要期刊IF=1.75)
http://dx.doi.org/10.1007/s11661-013-1655-5
57) Shu Yu，Fuqing Zhang，Xiang Xiong，Yunping Li*，Ning Tang，Yuichiro Koizumi，Akihiko Chiba, "Tribological Properties of Carbon/Carbon Composites with Various Pyrolytic Carbon Microstructures", Wear, 304(2013), 103–108. (权威期刊IF=2.32)
http://dx.doi.org/10.1016/j.wear.2013.04.031
2012年
58) Yuichiro Koizumi, Takeshi Nukaya, Shou Suzuki, Shingo Kurosu, Yunping Li, Hiroaki Matsumoto, Kazuhisa Sato, Yuji Tanaka and Akihiko Chiba, "Suzuki Segregation in Co–Ni-based Superalloy at 973 K: an experimental and computational study by phase-field simulation", Acta Mater, 60(2012), 2901-2915. (权威期刊IF=5.06)
http://dx.doi.org/10.1016/j.actamat.2012.01.054
59) Ning Tang, Yunping Li*, Shingo Kurosu, Yuichiro Koizumi, H. Matsumoto, Akihiko Chiba, "Interfacial reactions of solid Co and solid Fe with liquid Al", Corros Sci, 60(2012), 32-37. (权威期刊IF=5.15)
http://dx.doi.org/10.1016/j.corsci.2012.04.015
60) Yunping Li, Yui Yamashita, Ning Tang, Bin Liu, Shingo Kurosu, Hiroaki Matsumoto, Yuichiro Koizumi and Akihiko Chiba, "Influence of Carbon and Nitrogen Addition on Microstructure and Hot Deformation Behavior of Biomedical Co-Cr-Mo Alloy", Mater Chem Phys, 133(2012),849-854. (重要期刊IF=2.10)
http://dx.doi.org/10.1016/j.matchemphys.2012.05.069
61) Yunping Li, Jinshan Yu, Shingo Kurosu, Yuichiro Koizumi, Hiroaki Matsumoto, Akihiko Chiba, "Role of Nitrogen Addition in stabilizing the γ Phase of Co-29Cr-6Mo Alloy",Mater Chem Phys, 133(2012), 29-32. (重要期刊IF=2.10)
http://dx.doi.org/10.1016/j.matchemphys.2011.12.081
62) Yunping Li, Manabu Enoki, "Twinning Behavior of Pure Magnesium Quantitatively Investigated by Acoustic Emission", Mater Sci Eng A, 536(2012), 8-13. (重要期刊IF=2.65)
http://dx.doi.org/10.1016/j.msea.2011.10.010
63) Bin Liu, Yunping Li, Hiroaki Matsumoto, Yuichiro Koizumi, Yong Liu, Akihiko Chiba," Enhanced grain refinement through deformation-induced alpha precipitation in hot working of alpha+beta titanium alloy”, Adv Eng Mater, 14(2012), 785-789. (重要期刊IF=1.82)
http://dx.doi.org/10.1002/adem.201200044
64) Menghan Wang, Wenhao Wang, Jingjing Dong, Linhui Zhang, Yunping Li, Akihiko Chiba, "Quantitative analysis of work hardening and dynamic softening behaviors of Cu-6 wtpct Ag binary alloy based on true stress vs strain curves", Acta Metallurgica Sinica, 25(2012), 420–434. (重要期刊IF=0.73)
http://www.amse.org.cn/EN/abstract/abstract20900.shtml
65) Bin Liu, Hiroaki Matsumoto, Yunping Li, Yuichiro Koizumi, Yong Liu, Akihiko Chiba, "Dynamic Phase Transformation during Hot-Forging Process of a Powder Metallurgy α+β Titanium Alloy", Mater Trans, 53(2012), 1007-1010. (重要期刊IF=0.689).
http://dx.doi.org/10.2320/matertrans.M2012042
66) Kenta Yamanaka, Manami Mori, Yunping Li, Yuichiro Koizumi, Akihiko Chiba, "Dynamic strain aging in biomedical Co–Cr–Mo-based alloys with nitrogen doping", Key Eng. Mater., 508(2012), 141-145. (会议论文)
http://www.scientific.net/KEM.508.141
67) Hiroaki Matsumoto, Bin Liu, Sang-Hak Lee, Yunping Li, Kazuhisa Sato, Yoshiki Ono, Akihiko Chiba, “Hot Deformation Behavior of Ti-6Al-4V Alloy with a-Martensite Starting Microstructure“, Supplemental Proceedings: Materials Properties, Characterization, and Modeling, TMS, 2(2012), 871-876. (会议论文)
http://dx.doi.org/10.1002/9781118357002.ch108
2011年
68) Yunping Li, Manabu Enoki, “Anelastic recovery of pure magnesium quantitatively evaluated by acoustic emission", J Mater Research, 26(2011), 3098-3106. (重要期刊IF=1.58)
http://dx.doi.org/10.1557/jmr.2011.369
69) Ning Tang, Yunping Li*, Shingo Kurosu, Hiroaki Matsumoto, Yuichiro Koizumi, Akihiko Chiba, "Interfacial reactions between molten Al and a Co–Cr–Mo alloy with and without oxidation treatment", Corros Sci, 53(2011), 4324-4326. (权威期刊IF=5.15)
http://dx.doi.org/10.1016/j.corsci.2011.08.015
70) Bin Liu, Yunping Li, Hiroaki Matsumoto, Yanbin Liu, Yong Liu, Akihiko Chiba, "Thermomechanical characterization of P/M Ti-Fe-Mo-Y alloy with a fine lamellar microstructure", Mater Sci Eng A, 528(2011), 2345-2352. (重要期刊IF=2.65)
http://dx.doi.org/10.1016/j.msea.2010.12.055
71) Bin Liu, Yong Liu, Yunping Li, Wei Zhang, Akihiko Chiba, "Thermomechanical characterization of beta-stabilized Ti-45Al-7Nb-0.4W-0.15B alloy", Intermetallics, 19(2011), 1184-1190. (权威期刊IF=2.54)
http://dx.doi.org/10.1016/j.intermet.2011.03.021
72) Hiroaki Matsumoto, Sang-hak. Lee, Yoshiki Ono, Yunping Li, Akihiko Chiba "Formation of refined grain microstructure of Ti-6Al-4V alloy by hot deformation of α Martensitic starting microstructure", Adv Eng Mater, 13(2011), 470–474. (重要期刊IF=1.76)
http://dx.doi.org/10.1002/adem.201000317
73) Yunping Li, Emi Onodera, Hiroaki Matsumoto, Yuichiro Koizumi, Shu Yu, Akihiko Chiba, "Development of Novel Methods for Compensation of Stress-strain Curves", ISIJ International, 51(2011), 782-787. (重要期刊IF=0.93)
http://dx.doi.org/10.2355/isijinternational.51.782
74) Yui Yamashita, Yunping Li*, Hiroaki Matsumoto, Yuichiro Koizumi and Akihiko Chiba, "Construction of Processing Map for Biomedical Co-29Cr-6Mo-0.23C- 0.14N Alloy by Using Compression Tests", Mater Trans, 52(2011), 780-786. (重要期刊IF=0.689)
http://dx.doi.org/10.2320/matertrans.M2010388
75) Takuma Otomo，Shingo Kurosu，Yunping Li, Hiroaki Matsumoto，Yuichiro Koizumi，Akihiko Chiba, “Static recrystallization behavior of Co-Ni-Cr-Mo super-alloy after cold rolling and subsequent heat treatment” Supplemental Proceedings: Materials Fabrication, Properties, Characterization, and Modeling, TMS 2011, Volume 3, John Wiley & Sons, Inc., Hoboken, NJ, USA. (会议论文)
DOI: 10.1002/9781118062173.ch60
76) Yuichiro Koizumi, Syo Suzuki, Takuma Otomo, Shingo Kurosu, Yunping Li, Hiroaki Matsumoto and Akihiko Chiba A, “Phase-field Simulation of segregation to stacking fault (Suzuki Effect) in Co-Ni based super-alloy” Supplemental Proceedings: Materials Fabrication, Properties, Characterization, and Modeling, TMS 2011, Volume 3, John Wiley & Sons, Inc., Hoboken, NJ, USA. (会议论文)
http://dx.doi.org/10.1002/9781118062142.ch49
77) Hiroaki Matsumoto, Shingo Kurosu, Beoungsu Lee, Yunping Li, Yuichiro Koizumi, Akihiko Chiba “Deformation behavior of biomedical Co-Cr-Mo alloy” Supplemental Proceedings: Materials Fabrication, Properties, Characterization, and Modeling, TMS 2011, Volume 3, John Wiley & Sons, Inc., Hoboken, NJ, USA. (会议论文)
http://dx.doi.org/10.1002/9781118062142.ch54
2010年
78) Hiroaki Matsumoto, Shingo Kurosu, Beoungsu Lee, Yunping Li, Akihiko Chiba, "Deformation mode in biomedical Co-27% Cr-5% Mo alloy consisting of a single hexagonal close-packed structure", Scripta Mater, 63(2010), 1092-1095. (权威期刊IF=3.31)
http://dx.doi.org/10.1016/j.scriptamat.2010.08.006
79) Bin Liu, Yunping Li, Hiroaki Matsumoto, Yanbin Liu, Yong Liu, Huiping Tang, Akihiko Chiba, "Thermomechanical response of particulate-reinforced powder metallurgy titanium matrix composites-A study using processing map", Mater Sci Eng A, 527(2010), 4733-4741. (重要期刊IF=2.65)
http://dx.doi.org/10.1016/j.msea.2010.04.003
80) Yunping Li, Emi Onodera, Akihiko Chiba, "Evaluation of friction coefficient by simulation in bulk metal forming process", Metall. Mater. Trans. A, 41(2010), 224-232. (重要期刊IF=1.75)
http://dx.doi.org/10.1007/s11661-009-0066-0
81) Yui Yamashita, Yunping Li*, Emi Onodera, Hiroaki Matsumoto, Akihiko Chiba, "Dynamic recrystallization behavior of biomedical CCM alloy with additions of C and N" Mater Trans, 51(2010), 1633-1639. (重要期刊IF=0.689, 指导老师，日本金属学会青年研究优秀论文奖).
http://dx.doi.org/10.2320/matertrans.MAW201007
82) Shu Yu, Jie Chen, Qizhong Huang, Xiang Xiong, Yunping Li*,"Effect of braking speeds on the tribological properties of C/C composites" Mater Trans, 51(2010),1038-1043. (重要期刊IF=0.689).
http://dx.doi.org/10.2320/matertrans.M2009390
83) Yunping Li, Emi Onodera, Akihiko Chiba," Friction coefficient in hot compression of cylindrical sample" Mater Trans, 51(2010), 1210-1215. (重要期刊IF=0.689).
http://dx.doi.org/10.2320/matertrans.M2010056
84) Yunping Li, Emi Onodera, Akihiko Chiba, “Regarding the friction correction of deformation curves in hot forging process of cylindrical sample” Steel Research International, 81(2010), 370-373. (重要期刊IF=0.49).
85) Emi Onodera, Yunping Li, Hiroaki Matsumoto, Akihiko Chiba, “Intelligent hot forging process of artificial hip joint made of Ni-free Co-29Cr-6Mo-0.12N alloy” Steel Research International, 81(2010), 362-365. (重要期刊IF=0.49).
86) Yunping Li, Shingo Kurosu, Emi Onodera, Hiroaki Matsumoto, Akihiko Chiba, "Dynamic recrystallization behavior of biomedical CCM alloys in hot compression process", Mater Sci Forum, 654-656(2010), 1275-1278. (会议论文)
http://www.scientific.net/MSF.654-656.1275
87) Shingo Kurosu, Yunping Li, Hiroaki Matsumoto, Akihiko Chiba, "Grain refining technique and mechanical properties of the biomedical Co-Cr-Mo alloy", Mater Sci Forum, 654-656(2010), 2184-2187. (会议论文)
http://www.scientific.net/MSF.654-656.2184
88) 李云平, 小野寺恵美, 松本洋明, 山中謙太, 千葉晶彦, "生体用Co-29Cr-6Mo-0.16N合金の高温圧縮試験における摩擦/加工発熱補正と高精度Processing Map の構築", 塑性と加工, 51 (2010), 221-226.(日语期刊)
https://www.jstage.jst.go.jp/article/sosei/51/590/51_590_221/_pdf
89) 小野寺恵美, 黒須信吾, 李云平, 松本洋明, 千葉晶彦,"インテリジェント鍛造法によるNiフリーCo-Cr-Mo合金製人工股関節ステムの成形加工プロセスの検討", 塑性と加工, 51 (2010), 227-232. (日语期刊)
https://www.jstage.jst.go.jp/article/sosei/51/590/51_590_227/_pdf
2009年
90) Yunping Li, Hiroaki Matsumoto, Akihiko Chiba, “Correcting the Stress-strain Curve in Stroke-rate controlling forging process”, Metall. Mater. Trans. A, 40(2009), 1203-1209. (重要期刊IF=1.75)
http://dx.doi.org/10.1007/s11661-009-9811-7
91) Yunping Li, Emi Onodera, Hiroaki Matsumoto, Akihiko Chiba, “Correcting the Stress-strain Curve in Hot Compression Process to High Strain Level” Metall. Mater. Trans. A, 40A(2009),982-990. (重要期刊IF=1.75)
http://dx.doi.org/10.1007/s11661-009-9783-7
92) Ika Kartika, Yunping Li, Hiroaki Matsumoto and Akihiko Chiba, “Constructing Processing Maps for Hot Working of Co-Ni-Cr-Mo Superalloy”, Mater Trans, 50(2009),2277-2284. (重要期刊IF=0.689).
http://dx.doi.org/10.2320/matertrans.M2009103
2009年以前
93) Yunping Li, Shu Yu, “Thermal-mechanical process in producing high dispersed W-Cu composite powder”, Int. J. Refract Met. Hard Mater., 26(2008), 540-548. (重要期刊IF=2.26).
http://dx.doi.org/10.1016/j.ijrmhm.2008.01.001
94) Yunping Li, Manabu Enoki, “Recovery behavior of pure magnesium in cyclic compression –quick unloading- recovery process at room temperature investigated by AE”, Mater Trans, 49(2008),1800-1805. (重要期刊IF=0.689, 日本金属学会优秀青年论文).
http://dx.doi.org/10.2320/matertrans.MC200705
95) Yunping Li, Xuanhui Qu, “Properties of tungsten-copper composite powder produced by thermal–mechanical process”, Int. J. Refract. Met. Hard Mater., 21(5), 2003, 259-264. (重要期刊IF=2.26)
http://dx.doi.org/10.1016/j.ijrmhm.2003.08.001
96) Zhoushun Zheng, Xuanhui Qu, Yunping Li, “Fractal phenomena in powder injection molding”, Trans. Nonferrous Met. Soc. China,13(5),2003, 1112-1118. (国内英语期刊IF=1.18)
97) Yunping Li, Manabu Enoki, “Deformation and anelastic recovery of pure magnesium and AZ31B alloy investigated by AE”, Mater Trans, 48(2007), 2343-2348. (重要期刊IF=0.689).
http://dx.doi.org/10.2320/matertrans.MAW200720
98) Yunping Li, Manabu Enoki, “Evaluation of twinning behavior of polycrystalline pure magnesium at room temperature by acoustic emission”, Mater Trans, 48(2007) 1215-1220. (重要期刊IF=0.689).
http://dx.doi.org/10.2320/matertrans.I-MRA2007849
99) Yunping Li, Manabu Enoki, “Acoustic emission investigation of the anelastic recovery behavior of basal plane textured AZ31B as a function of loading direction”, Key Eng. Mater., (353-358)2007, 659-662.(会议论文)
http://dx.doi.org/10.4028/www.scientific.net/KEM.353-358.659
100) Yunping Li, Manabu Enoki, “Evaluation of anelastic recovery process of pure magnesium at room temperature by acoustic emission”, Key Eng. Mater., 321-323(2)2006, 1340-1343. (会议论文)
http://dx.doi.org/10.4028/www.scientific.net/KEM.321-323.1340
101) Yunping Li, Manabu Enoki, “Acoustic emission behaviors of recovery for Mg alloy at room temperature”, J. Acoustic Emission, 23(2005) 292-298. (会议论文)
http://www.ndt.net/article/jae/papers/23-292.pdf
102) Yunping Li, Xibin Li, “Mechanical and Tribological properties of Ni-coated SiCp reinforced heat resistance aluminum matrix composites”, Chinese J. Nonferrous Met., 11(6),2001, 1094-1098, (SCI)
103) Yunping Li, Xuanhui Qu, “Manufacturing of high dispersed W-Cu composite powder by mechano-thermal process”, J. Cent. S. Univ. Tech.,10(3), 2003, 168-172, (SCI)
http://dx.doi.org/10.1007/s11771-003-0002-1
104) Yunping Li, Xibin Li “Mechanical properties of coating particulates reinforced aluminum alloy matrix composites”, J. Cent. South Univ. Tech., 32(6),2001, 612-616,(SCI)
105) Yunping Li, Xibin Li, “Study on a new transpositional method to produce nickel-coated SiCparticulates”, J. Cent. South Univ. Tech., 32(2, )2001, 161-164,(SCI)
106) Shu Yu, Yunping Li, “Phase transfer catalysis oxidation to synthesize p-Nitrobenzoi cacid”, J.Cent. South Univ. Tech., 31(4),2000, 324-326,(SCI)
107) Yunping Li, Xuanhui Qu,“Thermal mechanical process producing W-Cu composite powder with ultrafine dispersed structure”, Powder Metall. Tech., 22(5), 2004, 266-269,(SCI)
http://f.wanfangdata.com.cn/download/Periodical_fmyjjs200405002.aspx
108) Yunping Li,, Xuanhui Qu, “The development of PIMed tungsten-copper composites”, Powder Metall. Tech., 21(2), 2003, 108-110,(SCI)
http://epub.cnki.net/grid2008/docdown/docdownload.aspx?
109) Yunping Li, Xibin Li, “Study of high thermal stability aluminum matrix composites by hot forging”, Powder Metall. Tech., 18(4), 2000, 247-251,(SCI)
110) Zhoushun Zheng, Xuanhui Qu, Yunping Li, “Fractal dimensions of reduced cobalt powder particle profiles”, Rare Met. Mater. Eng., 33(4),2004, 393-396,(SCI)
http://dx.doi.org/10.3321/j.issn:1002-185X.2004.04.013
111) Yunping Li, Xibin Li, “Mechanical properties of Ni coated SiC particulate reinforced Al-Fe-V-Si heat resistant aluminum matrix composite”, Rare Met. Mater. Eng., 31(3), 2002, 183-186,(SCI)
112) Shu Yu, Yunping Li, Xibin Li, “Micelles catalytic oxidation for the synthesis of p-Nitrobenzoic acid”, Petrochem. Tech., 29(9),2000, 658-661,(SCI)
113) Zhoushun Zheng, Xuanhui Qu, Yunping Li, “Numerical simulation of powder injection molding (PIM) filling process”, Mathematical Theory and Applications, 23, 2003, 96-100, (SCI)
114) Yunping Li, Xibin Li, “Replacement method for preparing nickel coated SiC powder”, J. Mater. Protec., 34(2), 2001, 15-17,
Yunping Li, Xuanhui Qu “The new developments of W-Cu (Mo-Cu) composite”, Cemented Carbide, 18(4), 2001, 232-236.
专利
日本专利 (9件)
1. 李云平，千叶晶彦，高强抗腐蚀NiCoCrMo基合金及制作方法，申请管理号：KSS0035921，2014年3月
2. 荒木健一(社)，李云平，千叶晶彦，聂璐，高强高导电W-Cu合金及制作方法，已申请from 三菱电机，2014年2月
3. 荒木健一(社)，李云平，千叶晶彦，汪丰林，高强高导电CuTiC合金及制作方法，已申请from 三菱电机，2014年2月
4. 千叶晶彦，李云平，山中谦太，卞华康，仓本浩二(社)，绫田伦彦(社)，及川宗一(社)，赤坂康则(社)，耐热Co-Ni-Cr-Mo超合金制作方法及成分, 申请号：2014-052786， 2014年2月
5. 李云平，千叶晶彦，注射成形部件用合金及制造方法，申请号：2014-223530，2013年11月
6. 李云平，千叶晶彦，田中佑一，小野寺惠，金属智能锻造用加工图制作软件, 公开号：2011-279609，2011年12月
7. 千叶晶彦，李云平，唐宁，铝精密铸造磨具用合金及制造方法，公开号：2011-195781，2011年9月
8. 李云平，小野寺惠，千叶晶彦，热加工应力应变曲线摩擦修正方法，公开号：2011-196758，2010年3月
9. 李云平，千叶晶彦，小野寺惠，热加工过程摩擦系数确定方法，公开号：2011-115805，2009年12月
国际专利(4件)
10. 李云平，千叶晶彦，高硬度抗腐蚀合金及制造方法,申请号: PCT/JP2014/70621,2014年8月5日
11. 千叶晶彦，李云平，唐宁，铝精密铸造磨具用合金及制造方法，公开号：WO2013-035351，2012年2月
12. 李云平，千叶晶彦，田中佑一，小野寺惠，金属智能锻造用加工图制作软件,公开号: WO2013-094225,2012年2月
13. 李云平，田中佑一，小野寺惠，千叶晶彦，热加工制品性能预测系统及预测方法，公开号: WO2013-128646,2012年3月
14. 千叶晶彦，松本洋明，小泉雄一郎，李云平，Co-Cr-Mo系合金及其制作方法，公开号: WO2013-136506,2012年3月16日

学术奖励
1) 本间奖励金 (30万日元)，日本本间奖励金协会,2014年5月
2) 第11回日本金属学会青年发表者论文奖 (第59回论文奖，指导老师)
3) 第8回日本金属学会青年发表者论文奖 (第56回论文奖), 2008年3月　
(目前唯一获奖中国人)

nianshi · 发表于 2019-6-24 17:31:01

2018自然科学基金面上项目-镁合金孪晶界阻尼的作用规律及机理研究
批准号 51871244 学科分类钢铁和有色合金结构材料 ( E010102 )
负责人李云平职称单位名称中南大学
资助金额 60万元项目类别面上项目起止年月 2019年01月01日至 2022年12月31日

		自动登录	找回密码
密码			立即注册

[专家学者] 中南大学材料学院李云平