苏州大学纳米科学技术学院梁志强

baosong

梁志强，苏州大学。主要从事聚合物太阳能电池、等离子体纳米结构和金属氧化物纳米结构的制备和性能研究，致力于器件性能优化及其物理机制方面的研究。迄今为止，在光电器件和热控涂层等领域在Energy & Environmental Science, Adv. Funct. Mater, Spinger, Sol. Energy Mater. Sol. Cells.等期刊与出版商上发表论文、论著（章节）10余篇.


梁志强
讲师
学历及学术经历：
2012年3月~ 2012年 7月，美国西北太平洋国家实验室（PNNL），访问研究；
2010年9月~ 2012年3月，美国华盛大学（UW），联合培养博士研究生；
2013年7月，哈尔滨工业大学，获工学博士学位；
2008年7月，哈尔滨工业大学，获工学硕士学位；
2006年7月，安徽工程科技大学，获学士学位；
        
所在课题组： 江林教授课题组

代表性论文：
[1]Zhiqiang Liang, Guozhong Cao*. “Nanomaterials for inverted polymer solar cells” (Chapter 3: Nanomaterials for Sustainable Energy) published by Springer, 2016. ISSN 1434-4904 ISSN 2197-7127.
[2] Zhiqiang Liang, Qifeng Zhang, Lin Jiang* and Guozhong Cao*. ZnO cathode buffer layers for inverted polymer solar cells, Energy & Environmental Science, 2015, 8, 3442-3476.
[3] Zhiqiang Liang, Jun Sun, Yueyue Jiang, Lin Jiang*, Xiaodong Chen*. “Plasmonic Enhanced Optoelectronic Devices”, Plasmonics, 2014, 9: 859-866.
[4] Jo-Lin Lan, Zhiqiang Liang, Yi-Hsun Yang, Fumio S. Ohuchi, Samson A. Jenekhe, Guozhong Cao*.“The effect of SrTiO3: ZnO as cathodic buffer layer for inverted polymer solar cells”, Nanoenergy, 2014, 4: 140-149.
[5] Zhiqiang Liang, Rui Gao, Jo-lin Lan, Orawan W, Qifeng Zhang, Dan Myers, Chundong Li*, Guozhong Cao*. “Growth of Vertically Aligned ZnO Nanowalls for Inverted Polymer Solar Cells”, Solar Energy Materials & Solar Cells, 2013, 117: 34-40.
[6] Zhiqiang Liang, Qifeng Zhang, Orawan W, Junting Xi, Zhou Yang, Kwangsuk Park, Chundong Li, Guozhong Cao*. “Effects of Morphology of ZnO Buffer Layer on Photovoltaic Performance of Inverted Polymer Solar Cells”, Advanced Functional Materials, 2012, 22 (10): 2194-2201.
[7] Rui Gao, Zhiqiang Liang, Jianjun Tian, Qifeng Zhang, Liduo Wang, Guozhong Cao*. “ZnO Nanocrystallite Aggregates Synthesized through Interface Precipitation for Dye-sensitized Solar Cells”, Nanoenergy, 2012, 1: 40-48.
[8] Rui Gao, Jianjun Tian, Zhiqiang Liang, Qifeng Zhang, Liduo Wang* and Guozhong Cao* “Nanorod�nanosheet hierarchically structured ZnO crystals on zinc foil as flexible photoanodes for dye sensitized solar cells”, Nanoscale, 2013,5, 1894-1901.
[9]Chundong Li, Jinpeng Lv*, Zhiqiang Liang. “Effects of Al doping on the optical and electrical properties of pre-synthesized ZnO powders by solid state method”, J Mater Sci: Mater Electron, 2012.
[10] Chundong Li, Jinpeng Lv*, Zhiqiang Liang, Shulong Yao. “Study on degradation and recovery of the optical properties of proton irradiated ZnO pigments”, Nucl. Instrum. Methods. Phys. Res., Sect. B, 2012.
[11] Orawan. W, Zhiqiang Liang, Qifeng Zhang, Guozhong Cao*, Pisith Singjai*. “The Role of Oxide Thin Layer in Inverted Structure Polymer Solar Cells”, Materials Sciences & Applications, 2011, 2: 1697-1701.
[12] Chundong Li, Zhiqiang Liang*, Haiying Xiao, Yiyong Wu, Yong Liu. “Synthesis of ZnO/Zn2SiO4/SiO2 composite pigments with enhanced reflectance and radiation stability under low energy proton irradiation”, Materials Letters, 2010, 64 (18): 1972-1974. (*Corresponding Author)

电话：0512-65882337
邮箱：zqliang@suda.edu.cn

xiuxing

具有多级结构的生物材料为设计和制备具有优异的力学性能和低密度的仿生材料提供了新的策略。然而，大多数的传统仿生材料只能利用生物材料的单一尺度，这也在很大程度上限制了其最终的力学性能。苏州大学梁志强博士、江林教授和马里兰大学帕克分校Teng Li教授合作提出了一种基于墨水的3D打印策略，并将其用于制备具有超高刚度和弹性的超轻多级石墨烯 (BHGMs)材料。该BHGMs可以在高达95%的压缩力下保持超高的弹性和稳定性。研究表明，BHGMs的分层多级结构可以有效地降低宏观压力，并将微观的压缩形变转化为石墨烯片的旋转和弯曲。这种3D打印策略也有望可以将其他功能材料组装成多级细胞结构，具有非常广阔的应用潜力和价值。

Meiwen Peng, Zhiqiang Liang, Teng Li, LinJiang. et al. 3D Printing of Ultralight Biomimetic Hierarchical Graphene Materials with Exceptional Stiffness and Resilience. Advanced Materials. 2019

DOI: 10.1002/adma.201902930

https://doi.org/10.1002/adma.201902930