|
周应国 副教授
材料科学与工程学院
个人邮箱: zhouyingguo@126.com
办公地点:镇江校区
通讯地址:梦溪路2号
邮政编码:212003
• 个人简介
周应国,男,博士,副教授,硕士生导师。主要从事材料先进加工技术相关的教学及科研工作。近五年,承担及参与国家自然科学基金、江苏省自然科学基金、镇江市重大科研计划、企业委托开发项目等12项;获相关教学及科研奖励12项(次),指导学生获奖26项(次)。在中英文学术期刊上已发表学术论文四十余篇(SCI/EI收录33篇),其中,近三年来以第一作者或通讯作者发表学术论文12篇(SCI收录9篇,EI收录1篇);出版论著1部(获国家学会二等奖);以第一完成人申请发明专利7件,已授权4件。
个人ORCID链接: http://orcid.org/0000-0002-8732-3624
• 研究方向
材料先进加工技术(轻量化工程、三维打印、先进模具技术等);
材料加工过程中的结构及性能关系(聚合物及复合物);
材料流变特性及材料改性(聚合物及复合物);
材料加工过程的数值模拟。
• 教育经历
2003-2009 郑州大学 硕士博士研究生;
2008-2009 美国威斯康星麦迪逊大学联合培养博士生;
2013-2014 美国威斯康星麦迪逊大学访问学者。
• 课程教学
本科生:《材料成型技术基础》、《主流CAE》、《塑料成型工艺及模具设计》、《专业课题研究训练》
研究生:《材料先进成形技术》
近三年来以第一作者或通讯作者完成的学术论文:
Ying-Guo Zhou*, Bei Su, Lih-Sheng Turng. Mechanical Properties, Fiber Orientation, and Length Distribution of Glass Fiber-Reinforced Polypropylene Parts: Influence of Water-Foaming Technology [J]. Polymer Composites, 2017, Online First.
https://doi.org/10.1002/pc.24523
Ying-Guo ZHOU*, Bei SU, Lih-Sheng TURNG. Depositing- Induced Effects of Isotactic Polypropylene and Polycarbonate Composites During Fused Deposition Modeling [J]. Rapid Prototyping Journal, 2017, 23(5), 869-880.
https://doi.org/10.1108/RPJ-12-2015-0189
Ying-Guo Zhou*, Bei Su, Hai-Hong Wu. Effect of Cold-drawn Fibers on the Self-reinforcement of the PP/LDPE Composites [J]. Journal of Materials Engineering and Performance, 2017, 26(8), 4072-4082.
https://doi.org/10.1007/s11665-017-2823-3
Bei Su, Ying-Guo Zhou*. Influence of Foaming Technology on Fiber Breakage in Long Fiber-Reinforced Composites Foamed Parts [J]. Plastics, rubber and composites, 2017, 46(8), 365-374.
https://dx.doi.org/10.1080/14658011.2017.1359464
Bei Su, Ying-Guo Zhou*, Hai-Hong Wu. Influence of Mechanical Properties of PP/LDPE Nanocomposites: Compatibility and Crystallization [J]. Nanomaterials and Nanotechnology, 2017, 7, 1-11.
https://doi.org/10.1177/1847980417715929
Ying-Guo Zhou*, Wen-Bin Wu, Gui-Yun Lu, Jun Zou. Isothermal and Non-Isothermal Crystallization Kinetics and Predictive Modeling in the Solidification of Poly(cyclohexylene dimethylene cyclohexanedicarboxylate) Melt [J]. Journal of Elastomers and Plastics, 2017, 49(2): 132-156.
https://doi.org/10.1177/0095244316641327
Ying-Guo ZHOU*, Bei SU, Lih-Sheng TURNG. Influence of Processing Conditions on Morphological Structure and Ductility of Water-Foamed Injection Molded PP/LDPE Blended Parts [J]. Cellular Polymers, 2017, 36(2), 51-74.
http://www.polymerjournals.com/journals.asp?Page=111&JournalDownload=ON&JournalType=cp&JournalIssue=cp36-2&JournalID=102954&JIP=
Ying-Guo Zhou*, Bei Su, Lih-Sheng Turng. Fabrication of Super-Ductile PP/LDPE Blended Parts With a Chemical Foaming Agent [J]. Journal of Applied Polymer Science, 2016, 133(42): 44101.
https://doi.org/10.1002/app.44101
Ying-Guo Zhou*, Wen-Bin Wu, Jun Zou, Lih-Sheng Turng. Dual-scale modeling and simulation of film casting of isotactic polypropylene [J]. Journal of Plastic Film and Sheeting, 2016, 32(3): 239-271.
https://doi.org/10.1177/8756087915595853
Bei Su, Ying-Guo Zhou*, Lih-Sheng Turng. Dual-Scale Modeling and Simulation of Skin Layer Thickness in Injection Molding with Variable Mold Temperatures [J]. Journal of Computational and Theoretical Nanoscience, 2016, 13(10): 7125-7136.
https://doi.org/10.1166/jctn.2016.5681
周应国, 苏北. PC复合物拉伸应变硬化的形成[J]. 高分子材料科学与工程, 2017, 33(9): 94-100.
https://doi.org/10.16865/j.cnki.1000-7555.2017.09.017
周应国, 刘新川, 王建伟. 熔融沉积微隙率与粘接强度关系模型的建立[J]. 塑料科技, 2016, 44(7): 21-26.
https://doi.org/10.15925/j.cnki.issn1005-3360.2016.07.001
近三年来出版的论著:
周应国. 注射模具浇注系统设计及案例分析[M]. 化学工业出版社, 2014年.
近十年以第一作者或通讯作者完成的其它代表性论文:
Guang-Long Wang, Ying-Guo Zhou*, Song-Jie Wang, Jing-Bo Chen*, Xiao-Li Zhang, Sheng Lu. Cylindritic Structures of isotactic Polypropylene Molded by Sequential Co-Injection Molding [J]. Journal of Polymer Research, 2013, 20(8): 212: 1-11.
https://doi.org/10.1007/s10965-013-0212-7
Ying-Guo Zhou*, Sheng Lu, Guang-Long Wang, Feng-Jian Shi. Modeling and Numerical Simulation of Injection Molding of Semi-crystalline Polymer Isotactic Polypropylene [J]. Journal of Computational and Theoretical Nanoscience, 2012, 9(9): 1364—1367.
https://doi.org/10.1166/jctn.2012.2203
Ying-Guo Zhou*, Lih-Sheng Turng, Chang-Yu Shen. Morphological Evolution and Orientation Development of Stretched iPP Films: Influence of Draw Ratio [J] Journal of Polymer Science Part B: Polymer Physics, 2010, 48(11): 1223—1234.
https://doi.org/10.1002/polb.22013
Ying-Guo Zhou*, Lih-Sheng Turng, Chang-Yu Shen. Modeling and Prediction of Morphology and Crystallinity for Cylindrical-Shaped Crystals During Polymer Processing [J]. Polymer Engineering and Science, 2010, 50(6): 1226—1235.
https://doi.org/10.1002/pen.21651
Ying-Guo Zhou*, Sheng Lu, Guang-Long Wang, Chang-Yu Shen. Predictive Modeling of Non-isothermal Crystallization in the Solidification of Polyoxymethylene Melt [J]. Polymer-Plastics Technology and Engineering,2010, 49(6): 624—635.
https://doi.org/10.1080/03602551003664511
Ying-Guo Zhou, Chang-Yu Shen*, Lih-Sheng Turng, Cun-Tai Liu, Qian Li. Computational Modeling and Numerical Simulation of Flow-Induced Crystallization Kinetics During Injection Molding of Polyethylene Terephthalate [J].Journal of Reinforced Plastics and Composite, 2010, 29: 76—85.
https://doi.org/10.1177/0731684408096419
Shen Changyu, Zhou Yingguo*, Zheng Guoqiang*, Liu Cuntai, Chen Jingbo, Li Qian. Stretching-induced β-crystal of iPP: Influence of stretching ratio [J]. Polymer Engineering and Science, 2008, 48: 2454—2458.
https://doi.org/10.1002/pen.21202
Shen Changyu, Zhou Yingguo*, Chen Jingbo*, Li Qian. Numerical Simulation of Crystallization Morphological Evolution under Non-isothermal Condition [J]. Polymer–Plastics Technology and Engineering. 2008, 47 (7): 708—715.
https://doi.org/10.1080/03602550802129676
申长雨, 周应国*, 陈静波*. 半结晶聚合物注射成型中结晶动力学的数值模拟[J]. 高分子学报, 2008, (8): 771—778.
近三年来以第一完成人获得的授权发明专利:
ZL 2015 1 0699006.7 周应国, 等. 一种PP/LDPE超延展制品的水发泡注射成型方法[P]. 中国发明专利, 申请日: 2015-10-23. 授权公告日: 2017-07-25. 授权公告号: CN105382991B
ZL 2015 1 0827427.3 周应国, 等. 利用高吸水树脂作为载体的水发泡注射方法[P]. 中国发明专利, 申请日: 2015-11-25. 授权公告日: 2017-05-17. 授权公告号: CN105291340B
ZL 2015 1 0557438.4 周应国, 等. 在普通注射机中生产超延展PP/LDPE微孔制品的方法[P]. 中国发明专利, 申请日: 2015-09-02. 授权公告日: 2017-05-17. 授权公告号: CN105235126B
ZL 2015 1 0681788.1 周应国, 等. 利用瞬间粘合剂提高聚合物三维打印制品粘接质量的方法[P]. 中国发明专利, 申请日: 2015-10-20. 授权公告日:2017-09-26. 授权公告号:CN105196545B
近三年来以第一完成人申请的发明专利:
周应国, 等. 一种充电式三维打印机[P]. 中国发明专利, 2015107063896, 2015-10-27.
周应国, 等. 一种以水作发泡剂生产长玻纤增强聚丙烯发泡注射制品的方法[P]. 中国发明专利, 2016100601426, 2016-01-28.
周应国, 等. 一种单向大尺寸制件的3D打印方法及其打印装置[P]. 中国发明专利, 201611074949.1, 2016-11-29.
近年来所获得的主要奖励:
2017年1月,中国石油和化学工业联合会,优秀出版物奖,二等;
2016年12月,镇江市人民政府,优秀论文(专著)奖,二等;
2016年11月,江苏科技大学,学年教学优秀奖;
2015年5月,江苏科技大学,微课比赛课件比赛奖,二等;
2014年12月,江苏科技大学,教学成果奖,三等;
2013年12月,镇江市人民政府,优秀论文(专著)奖,二等;
2013年10月,江苏科技大学,优秀教学质量奖;
2013年9月,江苏科技大学,优秀教师;
2012年11月,江苏科技大学,本科生创新计划优秀指导教师;
2011年11月,镇江市人民政府,优秀论文(专著)奖,二等;
2011年11月,江苏科技大学,暑期社会实践优秀指导教师;
2011年9月,江苏科技大学,优秀班主任;
近年来指导学生获得的主要奖励:
2017年6月,华东区大学生CAD应用技能竞赛,二等奖;
2017年6月,中国大学生铸造工艺设计大赛,优秀奖四项;
2017年6月,江苏科技大学本科优秀毕业设计;
2016年6月,华东区大学生CAD应用技能竞赛,三等奖;
2016年6月,中国大学生铸造工艺设计大赛,本科生组三等奖一项,优秀奖一项;
2016年6月,江苏科技大学本科优秀毕业设计;
2015年6月,华东区大学生CAD应用技能竞赛,三等奖两项;
2015年6月,中国大学生铸造工艺设计大赛,优秀奖三项;
2015年6月,江苏科技大学本科优秀毕业设计;
2014年6月,中国大学生铸造工艺设计大赛,硕士生组三等奖一项,优秀奖一项;
2014年6月,江苏科技大学本科优秀毕业设计;
2013年6月,华东区大学生CAD应用技能竞赛,三等奖两项;
2013年6月,中国大学生铸造工艺设计大赛,优秀奖三项;
2013年6月,江苏科技大学本科优秀毕业设计两人次;
2012年10月,江苏科技大学本科生创新计划优秀项目;
2012年6月,中国大学生铸造工艺设计大赛,三等奖一项,优秀奖一项;
2012年6月,江苏科技大学本科优秀毕业设计;
2011年6月,江苏科技大学本科优秀毕业设计;
|
声明:本网部分文章和图片来源于网络,发布的文章仅用于材料专业知识和市场资讯的交流与分享,不用于任何商业目的。任何个人或组织若对文章版权或其内容的真实性、准确性存有疑义,请第一时间联系我们,我们将及时进行处理。
|