找回密码
 立即注册

QQ登录

只需一步,快速开始

查看: 1160|回复: 1

[专家学者] 上海交通大学材料学院沈忱

[复制链接]

75

主题

98

帖子

106

积分

注册会员

Rank: 2

积分
106
发表于 2020-1-15 17:09:38 | 显示全部楼层 |阅读模式
沈忱上海交通大学材料学院助理教授。2011年毕业于南京工业大学,之后在澳大利亚伍伦贡大学获得硕士和博士学位。主要从事熔丝电弧增材制造方面的研究工作。


姓名:         沈忱
职称:         助理教授
博导/硕导:         硕导
所属二级机构:          焊接与激光制造研究所
通讯地址:         上海市东川路800号材料E楼204A室
邮编:         200240
E-mail:         shenchen486@126.com
从事专业:        材料加工工程
学习与工作简历:       
学习经历:
  2013/08-2016/08,澳大利亚伍伦贡大学,工程与信息学院,博士
  2012/02-2013/03,澳大利亚伍伦贡大学,工程与信息学院,硕士
  2007/09-2011/06,南京工业大学,土木工程学院,本科


工作经历:
  2018/10-至今,上海交通大学,材料科学与工程学院,助理教授
  2016/08-2018/09,澳大利亚伍伦贡大学,工程与信息学院,副研究员


研究方向一        熔丝电弧增材制造
研究方向二         金属材料表征及性能


代表性论文、论著       
  [1] C. Shen, K.D. Liss, Z. Pan, Z. Wang, X. Li, H. Li, Thermal cycling of Fe3Al based iron aluminide during the wire-arc additive manufacturing process: An in-situ neutron diffraction study. Intermetallics, 92 (2018) 101-107.
  [2] C. Shen, Z. Pan, D. Cuiuri, S. van Duin, D. Luo, B. Dong, H. Li, Influences of postproduction heat treatment on Fe3Al based iron aluminide fabricated using the wire-arc additive manufacturing process. The International Journal of Advanced Manufacturing Technology, 97 (2018) 335-344.
  [3] C. Shen, Z. Pan, Y. Ma, D. Cuiuri, H. Li, Fabrication of iron-rich Fe-Al intermetallics using the wire-arc additive manufacturing process. Additive Manufacturing, 7 (2015) 20-26.
  [4] C. Shen, Z. Pan, D. Cuiuri, D. Ding, H. Li, Influences of deposition current and interpass temperature to the Fe3Al-based iron aluminide fabricated using wire-arc additive manufacturing process. The International Journal of Advanced Manufacturing Technology, 88 (2017) 2009-2018.
  [5] C. Shen, Z. Pan, D. Cuiuri, J. Roberts, H. Li, Fabrication of Fe-FeAl functionally graded material using the wire-arc additive manufacturing process. Metallurgical and Materials Transactions B, 47 (2016) 763-772.
  [6] C. Shen, Z. Pan, D. Cuiuri, B. Dong, H. Li, In-depth study of the mechanical properties for Fe3Al based iron aluminide fabricated using the wire-arc additive manufacturing process. Materials Science & Engineering A, 669 (2016) 118-126.
  [7] C. Shen, Z. Pan, D. Ding, L. Yuan, N. Nie, Y. Wang, D. Luo, D. Cuiuri, S. van Duin, H. Li, The influence of post-production heat treatment on the multi-directional properties of nickel-aluminum bronze alloy fabricated using wire-arc additive manufacturing process, Additive Manufacturing, 22 (2018) 411-421.
  [8] B. Dong, Z. Pan, C. Shen, Y. Ma, H. Li, Fabrication of copper-rich Cu-Al alloy using the wire-arc additive manufacturing process. Metallurgical and Materials Transactions B, 48 (2017) 3143-3151.
  [9] Y. Ma, D. Cuiuri, C. Shen, H. Li, Z. Pan, Effect of interpass temperature on in-situ alloying and additive manufacturing of titanium aluminides using gas tungsten arc welding. Additive Manufacturing, 8 (2015) 71-77.
  [10] Y. Ma, D. Cuiuri, H. Li, Z. Pan, C. Shen, The effect of postproduction heat treatment on  -TiAl alloys produced by the GTAW-based additive manufacturing process. Materials Science & Engineering A, 657 (2016) 86-95.
  [11] D. Ding, C. Shen, Z. Pan, D. Cuiuri, H. Li, N. Larkin, S. van Duin, Towards an automated robotic arc-welding-based additive manufacturing system from CAD to finished part. Computer-Aided Design, 73 (2016) 66-75.
  [12] A.M. Paradowska, N. Larkin, H. Li, Z. Pan, C. Shen, M. Law, Neutron diffraction residual stress measurements of welds made with pulsed tandem gas metal arc welding (PT-GMAW). Powder Diffraction, 29 (2014) S24-S27.
  [13] D. Ding, Z. Pan, S. van Duin, H. Li, C. Shen, Fabricating superior NiAl Bronze components through wire-arc additive manufacturing. Materials, 9 (2016) 652.
  [14] J. Wang, Z. Pan, Y. Ma, Y. Lu, C. Shen, D. Cuiuri, H. Li, Characterization of wire arc additively manufactured titanium aluminide functionally graded material: Microstructure, mechanical properties and oxidation behavior. Materials Science & Engineering A, 734 (2018) 110-119.

  声明:本网部分文章和图片来源于网络,发布的文章仅用于材料专业知识和市场资讯的交流与分享,不用于任何商业目的。任何个人或组织若对文章版权或其内容的真实性、准确性存有疑义,请第一时间联系我们,我们将及时进行处理。
回复

使用道具 举报

75

主题

98

帖子

106

积分

注册会员

Rank: 2

积分
106
 楼主| 发表于 2020-1-15 17:10:01 | 显示全部楼层
电弧增材原位制备Fe3Al合金的组织等轴化及强韧化机理
批准号        51901136       
学科分类        制备加工一体化与近净成形的材料基础 ( E011302 )
项目负责人        沈忱       
依托单位        上海交通大学
资助金额        26.00万元       
项目类别        青年科学基金项目       
研究期限        2020 年 01 月 01 日 至2022 年 12 月 31 日

回复 支持 反对

使用道具 举报

小黑屋|手机版|Archiver|版权声明|一起进步网 ( 京ICP备14007691号-1

GMT+8, 2024-3-29 20:28 , Processed in 0.083555 second(s), 36 queries .

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回复 返回顶部 返回列表